Experimental and Empirical Studies to Evaluate Liquefaction Resistance of Partially Saturated Sands

Abstract

Partially saturated sands with occluded gas bubbles may occur naturally in the field or can be created artificially as a way of mitigating liquefaction effects. This study aimed to investigate the main parameters that influence the liquefaction resistance of partially saturated sands containing occluded gas bubbles. It also adopted a simplified approach and proposed empirical relationships that linked the liquefaction-resistance ratio to the bulk modulus, maximum volumetric strain, and excess pore-pressure ratio. Considering these objectives, a total of 60 stress-controlled dynamic triaxial tests were conducted. Nearly/fully saturated and partially saturated sand specimens prepared using sodium percarbonate were subjected to undrained cyclic loading with a loading frequency of 0.1 Hz. The loosely or densely packed sand specimens at different degrees of saturation (79-100%) were examined under different initial effective confining stresses (25-100 kPa) and back pressures (100-400 kPa). The analysis of the test results indicated that the liquefaction resistance of the partially saturated sands constantly increased as the degree of saturation decreased, and this effect was more prominent under higher initial effective confining stresses and lower back pressures. The adopted method satisfactorily captured this trend and showed reasonable matches between the empirical predictions and experimentally observed results from this study and previous research.