Structural and morphological properties of SnO2: Sb: F thin films produced by spray pyrolysis technique at various substrate temperatures

dc.contributor.authorBattal, Ahmet
dc.contributor.authorDüzgün, Bahattin
dc.date.accessioned2022-01-27T16:45:45Z
dc.date.available2022-01-27T16:45:45Z
dc.date.issued2019
dc.departmentMAUNen_US
dc.descriptionmsufbden_US
dc.description.abstractDoubly(antimony and fluorine) doped tin oxide (SnO2:Sb:F/AFTO) thin filmswith low solution concentration and low Sb doping were deposited on the glassby using spray pyrolysis technique at different substrate temperatures. The effectof substrate temperature on properties of the prepared films was investigated. Itwas seen from X-ray diffraction analysis that the thin films are rutilestructure with polycrystalline and orientations along (101), (200) and (210)directions for all substrate temperature. SEM and AFM images indicated thatthin films were affected by substrate temperature and the surface of films washomogeneous and to be made of nanocrystalline. The films have 83% averagetransmittance values and Eg values are between 3.10-3.89 eV. These Egand transmittance values changed continuously with substrate temperatures.Hence, it was concluded that properties of thin films were affected by thesubstrate temperature and these result mostly compatible with the resultsobtained from literature.en_US
dc.description.abstractDüşük çözelti konsantrasyonlu ve düşük Sb dopingli çifte(antimon ve flüor) katkılı kalay oksit (SnO2:Sb:F/AFTO) incefilmler, farklı altlık sıcaklıklarında sprey piroliz tekniği kullanılarak camaltlık üzerinde biriktirildi. Altlık sıcaklığının hazırlanan filmlerinözellikleri üzerindeki etkisi araştırılmıştır. X-ışını difraksiyon analizinde, ince filmlerin, tüm substrat sıcaklığı için (101), (200) ve (210) yönleriboyunca yönelimli ve polikristal tetragonal bir yapı olduğu görülmüştür. SEM veAFM görüntüleri, ince filmlerin altlık sıcaklığından etkilendiğini, film yüzeylerininhomojen olduğunu ve nanokristallerden yapıldığını gösterdi. Filmler % 83ortalama geçirgenlik değerlerine sahiptir ve Eg değerleri 3.10-3.89eV arasındadır. Bu Eg ve geçirgenlik değerleri altlık sıcaklıklarıile sürekli değişmiştir. Bu yüzden ince film özelliklerinin substratsıcaklığından etkilendiği ve bu sonuçların çoğunlukla literatürden elde edilensonuçlarla uyumlu olduğu sonucuna varıldı.en_US
dc.description.dergiparkid648108en_US
dc.identifier.doi10.18586/msufbd.648108
dc.identifier.endpage682en_US
dc.identifier.issn2147-7930
dc.identifier.issn2149-6455
dc.identifier.issue2en_US
dc.identifier.startpage673en_US
dc.identifier.urihttps://doi.org/10.18586/msufbd.648108
dc.identifier.urihttps://hdl.handle.net/20.500.12639/3030
dc.identifier.volume7en_US
dc.institutionauthorBattal, Ahmet
dc.language.isoen
dc.publisherMuş Alparslan Üniversitesien_US
dc.relation.ispartofMuş Alparslan Üniversitesi Fen Bilimleri Dergisien_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectSpray Pyrolysisen_US
dc.subjectThin filmsen_US
dc.subjectElectrical Propertiesen_US
dc.subjectPLen_US
dc.subjectAntimony and Fluorine doped tin oxide (SnO2:Sb:F)en_US
dc.subjectSprey pirolizen_US
dc.subjectİnce filmleren_US
dc.subjectElektriksel Özellikleren_US
dc.subjectAntimon ve Flor katkılı kalay oksit (SnO2: Sb: F)en_US
dc.subjectPL çalışmalarıen_US
dc.titleStructural and morphological properties of SnO2: Sb: F thin films produced by spray pyrolysis technique at various substrate temperaturesen_US
dc.title.alternativeFarklı altlık sıcaklıklarında sprey piroliz yöntemiyle üretilen SnO2: Sb: F ince filmlerin yapısal ve morfolojik özelliklerien_US
dc.typeArticle

Dosyalar

Orijinal paket

Listeleniyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
İsim:
3030.pdf
Boyut:
1.13 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text